• Home
• Furnaces Off The
  Shelf
• Ovens Off The
  Shelf
• Power Supplies
  
High Temp Components • Contact Us
1200 °C Box Furnaces, Heavy Duty
 
Heavy-Duty 1200°C Box Furnaces feature a unique internal construction and outer shell design which reduces external surface temperatures without compromising interior temperature uniformity. Requires independent control console, Model No. CC58114C (ordered separately).
General Features
  • Individual heating elements at chamber top, bottom and sides for uniform heat distribution
  • Swing down door provides convenient loading platform.
  • Helically coiled, high temperature alloy wire elements for extended service life
  • Unique Moldathermâ ceramic fiber insulation to allow rapid heat-up, recovery and cool-down rates
  • High temperature insulation in vestibule and floating plug door to minimize heat loss and improve temperature control
  • Spring-loaded door holds door securely shut; door rests in horizontal position when open
  • Sight glass for convenient observation of heated load during operation
  • Refractory plate heating unit (Model BF51442C)
  • Heating element imbedded in Moldathermâ insulation (Model BF51542C)
  • Rugged, heavy-duty Inconelª hearthplate supports load and protects the furnace from damage due to spillage
  • Long-life Platinel¨ II thermocouple with 10' compensated lead wire and polarized plug
Controllers

1200°C Digital, Single Setpoint Controller
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), single segment, single setpoint, 1 ramp to setpoint. Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F.

Option P 1200°C Digital 16 Segment Programmable Controller
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), with 16 segments, 1 program with 8 ramps (up and down) and 8 dwells (timed holds). Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F. 

Option B Overtemperature Control (OTC)
 Adjustable digital overtemperature control, factory installed on selected control consoles with "B" designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature  control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via magnetic contacts through signal from independent thermocouple.

Specifications

200º Box Furnace, Heavy Duty
With Refractory Plate Heating Element,
Temperature Range 100ºC to 1200ºC

Independent Controller Required Model# CC58114C

Model Electrical
Volts, Hz, 1Ø		 Watts Interior Dimensions
W X F-B X H in" (cm)		 Exterior Dimensions
W X F-B X H in" (cm)
BF51442C 208/240V,
50/60Hz		 4800 7.5"(19)x14"(35.6)x 5.25"(13.3) 20"(50.8)x20"(50.8)x24.5"(62.2)

With Moldatherm® Heating Element (Four Sides),
Temperature Range 100ºC to 1200ºC

Independent Controller Required Model# CC58114C

Model Electrical
Volts, Hz, 1Ø		 Watts Interior Dimensions
W X F-B X H in" (cm)		 Exterior Dimensions
W X F-B X H in" (cm)
BF51542C 208/240V,
50/60Hz		 6200 10.5"(26.7)x14.5"(36.8) x9.5"(24.1) 28"(71.1)x31"(78.7)x28.5"(72.4)

Web Site designed and Maintained by Web Site Publishers, Inc.©