• Available in two popular chamber sizes (see chart) 
• Double shell design for lower external cabinet temperature with energy savings
• Moldathermâ high temperature ceramic fiber insulation with advanced graded design for fast heat-up and resistance to thermal shock
• Vertically hinged door lifts up and out of the way to save space and minimize exposure to the operator
• Removable panels for easy access to replaceable heating elements and
  thermocouples
• Moldathermâ hearthplate supports load and protects chamber from spills or mishandling 
• High volume cooling fans move air between inner and outer chamber to reduce exterior shell temperatures and improve energy efficiency and operator safety
• Long-life type "B" thermocouples with 10' compensated lead wire and polarized plug for accurate high temperature measurement

Smart Heating Elements

• Molybdenum disilicide elements with unique right angle bend and sidewall mounting reduce maintenance usually associated with element termination and mounting
• Designed for easy replacement without matching resistance values
• Fast heat-up and recovery with excellent uniformity and energy efficiency
• Increased resistance to thermal shock, ideal for rapid cycling over extended periods

1700°C Controller, Programmable, With Communications

Lindberg/Blue M 1700°C Programmable Controllers provide 16 programmable segments consisting of 8 ramps (up and down) and 8 dwells (timed holds) per program. Multiple profiles for many applications may be developed from the 16 segment programs by linking the four 16 segment programs into a single 64 segment program. The controller visually displays ramp rate, dwell time, program segment and percent power output. A holdback feature allows the operator to set a -process vs. setpoint" temperature value which, when exceeded, holds the program to allow the process to catch up.

The controller includes an advanced self-tuning feature which automatically sets the best PID settings for the thermal process. Two LED displays simultaneously indicate actual temperature and setpoint temperature. High limit overtemperature protection is standard. The control console includes a circuit breaker, power module, transformer and cooling fans. 

Includes RS232 data port (communications card and port) for connection to remote computer, allowing modification, interrogation and data transfer of allinstrument control and configuration parameters. Software not included.

Option B Overtemperature Control (OTC)

• Adjustable digital overtemperature control, factory installed on selected control consoles with "B" designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via signal from independent thermocouple

Specifications

1700° Box Furnaces, Temperature Range 500°C to 1700°C

Independent Controller Required Model# 3500CC59246COMC &

5000CC59256COMC