General Features
- Requires independent controller (ordered separately, see chart)
- Unitized heating and insulation element with helical wire coil imbedded in
Moldathermâ insulation for maximum heat transfer to the work load
- Cover plug with Moldathermâ insulation and handle for safe removal
- Moldathermâ insulation protects vestibule, improves energy efficiency
- Platinelâ II thermocouple with 10'compensated lead wire and polarized plug for long life and accurate temperature measurement
- Moldathermâ ceramic fiber hearthplate supports load and protects furnace from spillage.
Controllers
1200°C Digital, Single Setpoint Controller
- Control console is fully wired and includes advanced
microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack.
Includes microprocessor-based PID control (proportional, integral, derivative), single segment, single setpoint, 1 ramp to setpoint. Built-in adjustable high limit overtemperature protection. Simultaneous LED
display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F.
1200°C Digital 16 Segment Programmable Controller
- Control console is fully wired and includes advanced microprocessor-based digital
control, a solid-state power module, on/off circuit breaker and thermocouple input jack.
Includes microprocessor-based PID control (proportional, integral, derivative), with 16 segments, 1 program with 8 ramps (up and down) and 8 dwells (timed holds). Built-in
adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F.
Option B Overtemperature Control (OTC)
- Adjustable digital overtemperature control, factory installed on selected control consoles
with "B" designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via magnetic contacts through signal from independent thermocouple.
1200° Moldatherm® Box
Furnaces, Temperature
Range 100°C
to 1200°C
Independent Controller Required
Model# CC58114C
| Model |
Electrical
Volts, Hz, 1Ø |
Watts |
Top
Opening
ID in"(cm) |
Chamber
Depth |
Exterior
Dimensions
W X F-B X H in" (cm) |
| CF56622C |
208/240V,
50/60Hz |
1700 |
5"(12.7) |
8"(20.3) |
15"(38.1)x
15"(38.1)x16"(40.6) |
| CF56822C |
208/240V,
50/60Hz |
2600 |
7.5"(19.05) |
8"(20.3) |
20"(50.8)x
20"(50.8)x19"(48.3) |
|
