|
|
|
Three Zone
Controllers - Three Control Choices
1500°C Three Zone Controller -
Option One
Control console is fully wired and includes advanced
microprocessor-based digital control, a solid-state power module,
on/off circuit breaker and thermocouple input jacks for each zone.
Includes three microprocessor-based PID controls (proportional,
integral, derivative), single setpoint, 1 ramp to setpoint.
Built-in adjustable high limit overtemperature protection.
Simultaneous LED display of actual temperature vs. setpoint. May
be configured to display temperature in either °C or °F.
• RS-485 communication port available as an option
|
Model |
CC58475C |
CC58485C |
|
Digital |
 |
|
|
With Programmer |
|
|
|
With Overtemp Control
|
|
|
|
Electrical Volts, Hz |
208/240V,
50/60Hz |
208/240V,
50/60Hz |
|
Maximum Amps |
30/60/30 |
60/120/60 |
Exterior Dimensions
W x F-B x H in" (cm) |
17"(43.2)x21"(53.3)
x17"(43.2) |
24"(61)x21"(53.3)
x17"(43.2) |
|
Ship Weight lbs (kg) |
70(32) |
80(37) |
1500°C Three Zone 16 Segment One Programmable Controller
- Option Two
Control console is fully wired and includes advanced
microprocessor-based digital control, a solid-state
power module, on/off circuit breaker and thermocouple
input jacks for each zone.
Center Zone
One microprocessor-based PID programmable control
(proportional, integral, derivative), 1 program of 16
segments for ramps (up and down) and dwells (timed
holds). Built-in adjustable high limit overtemperature
protection. Simultaneous LED display of actual
temperature vs. setpoint.
End Zones
Two microprocessor-based PID control (proportional,
integral, derivative), single segment, single setpoint
which mimic the programmed profile of the center zone
controller, but allow an offset up to 100°C. Offset is
LED displayed.
Option B Overtemperature
Control (OTC)
Adjustable digital overtemperature control, factory
installed on selected control consoles with "B"
designation; see chart. Protects furnace and load in the
event of primary control circuit failure. Overrides main
controller, assumes temperature control and shuts off
power to furnace if high limit is reached. Manual re-set
required for safety. Operates via magnetic contacts
through signal from independent thermocouple.
|
Model |
CC58475PC |
CC58485PC |
CC58475PBC |
CC58485PBC |
|
Digital |
|
|
|
|
|
With Programmer |
|
|
|
|
|
With Overtemp Control |
|
|
|
|
|
Electrical Volts, Hz |
208/240V,50/60Hz |
208/240V,50/60Hz |
208/240V,50/60Hz |
208/240V,50/60Hz |
|
Maximum Amps |
30/60/30 |
60/120/60 |
30/60/30 |
60/120/60 |
Exterior Dimensions
W x F-B x H in" (cm) |
17"(43.2)x21"(53.3)
x17"(43.2) |
24"(61)x21"(53.3)
x17"(43.2) |
17"(43.2)x21"(53.3)
x17"(43.2) |
24"(61)x21"(53.3)
x17"(43.2) |
|
Ship Weight lbs (kg) |
70(32) |
80(37) |
80(37) |
90(41) |
|
1500°C Three Zone 16 Segment Three Programmable
Controllers - Option Three
Control console is fully wired and includes advanced
microprocessor-based digital control, a solid-state
power module, on/off circuit breaker and thermocouple
input jacks for each zone. Includes three
microprocessor-based PID programmable controllers
(proportional, integral, derivative), with 1 program of
16 segments for ramp (up and down) and dwells (timed
holds). Built-in adjustable high limit overtemperature
protection. Simultaneous LED display of actual
temperature vs. setpoint. May be configured to display
temperature in either °C or °F.
Option B Overtemperature
Control (OTC)
Adjustable digital overtemperature control, factory
installed on selected control consoles with "B"
designation; see chart. Protects furnace and load in the
event of primary control circuit failure. Overrides main
controller, assumes temperature control and shuts off
power to furnace if high limit is reached. Manual re-set
required for safety. Operates via magnetic contacts
through signal from independent thermocouple. RS-485
communications port available as an option.
|
Model |
CC584343PC |
CC584343PBC |
|
Digital |
|
|
|
With Programmer |
|
|
|
With Overtemp Control |
|
|
|
Electrical Volts, Hz |
208/240V,50/60Hz |
208/240V,50/60Hz |
|
Maximum Amps |
30/60/30 |
60/120/60 |
Exterior Dimensions
W x F-B x H in" (cm) |
17"(43.2)x21"(53.3)
x17"(43.2) |
24"(61)x21"(53.3)
x17"(43.2) |
|
Ship Weight lbs (kg) |
80(37) |
90(41) |
|
|
|
|
