|
|
1200°C Split Hinge Tube Furnace
Single Zone and Three Zone
Lindberg/Blue M 1200°C split hinge tube furnaces are
configurable for horizontal or vertical use. Choose from
single zone models of 12" and 24" heated lengths, and three
zone models of 24" to 36" heated lengths. Furnaces use
independent digital temperature control modules (ordered
separately) which are available in standard or programmable
options.
The split-hinge design permits easy observation, fast cooling,
convenient placement of the process tube and overall ease of
operation. All models can be used with a variety of ceramic,
quartz or alloy process tubes (customer supplied), diameters
to 6" depending on model. One set of tube adapters is included
with each model.
|
General Features
- Designed for horizontal or vertical operation
- Patented Moldathermâ LGOä heating element modules for superior radial and linear
temperature uniformity, fast heat-up and cool-down
- Long-life, energy efficient elements require little or no maintenance
- Unique cabinet design achieves lower exterior surface temperature
- Heat reflecting element support assembly creates two highly effective insulating air
spaces
- Compact cabinet with high temperature resistant painted finish
- Accepts interchangeable Moldathermâ tube adapters
- Long-life Platinelâ II
thermocouple(s) with 10' compensated lead wire and polarized
plug
- RS-485 communication port
available as an option.
Three Zone Models
- Three independent power circuits (zones) with independent
thermocouples for control references
- Full adjustment of each zone over entire operating range to 1200°C
- Center zone uniformity achieved and operating length maximized through adjustable profiling of end zones by independent controller
- Temperature uniformity achieved with independent setpoint of end zones higher or lower than center
Specifications
Single Zone
1200° Split Hinge, Horizontal or Vertical Use,
Temperature Range 100°C
to 1200°C
Independent Controller Required
Model# CC58114C
| Model |
Electrical
Volts, Hz, 1Ø |
Watts |
Exterior
Dimensions
W X F-B X H in" (cm) |
Process
Tube
Diameter in" (cm) |
|
HTF55122A
12"(30.48) |
120V,
50/60 Hz |
1330 |
13"(33)x21"(53.3)x12"(30.5) |
75"(1.9)to1"(2.54) |
| HTF55322A
12"(30.48) |
120V,
50/60 Hz |
2675 |
17"(43.2)x23"(58.4)x16"(40.6) |
1"(2.54)to3"(7.62) |
|
HTF55322C
12"(30.48) |
208/240V,
50/60Hz |
2675 |
17"(43.2)x23"(58.4)x16"(40.6) |
1"(2.54)to3"(7.62) |
| HTF55342C
24"(60.96) |
208/240V,
50/60Hz |
5440 |
17"(43.2)x23"(58.4)x16"(40.6) |
1"(2.54)to3"(7.62) |
|
Triple Zone
|
Model |
Electrical
Volts,
Hz, 1Ø |
Watts |
Exterior Dimensions
W X F-B X H in" (cm) |
*Process
Tube Diameter
in" (cm) |
Heated
Length
in" (zones) |
|
HTF55347C |
208/240V,
50/60 Hz |
5355 |
17"(43.2) x 35"(88.9) x 16"(40.6) |
1" (2.54) to
3" (7.62) |
24"(8-8-8)) |
|
HTF55667C |
208/240V,
50/60 Hz |
11760 |
21"(53.3) x 49"(124.5) x 20"(50.8) |
3" (7.62) to
6" (15.24) |
36"(12-12-12) |
Heat Up/ Cool Down Rates
|
Model HTF55000 Series,
Heat-Up/, No Load |
Model HTF55000 Series,
Cool-Down, No Load |
Model HTF55000 Series,
Uniformity Profiles |
|
|
|
)
)
)