• Temperature Range: +40 degrees Celsius to +260 degrees Celsius
• Temperature Uniformity: ±3 percent at 100 degrees Celsius. Actual performance of your Laboratory test oven may vary depending on load, chamber size, sample placement, ambient temperature and your laboratory test ovens environmental conditions.
• Controller: Microprocessor automatically optimizes the laboratory test ovens control parameters during oven operation. Digital, single set point with simultaneous LED display of actual temperature vs. set point. Our laboratory test oven may be configured to display temperature in Celsius degrees or Fahrenheit degrees.
• Control Accuracy: ±0.5 percent typical for your laboratory test oven.
• High Limit Over Temp: Our laboratory test oven come equipped with adjustable high temperature limit protection.
• Heating Elements: Long life, low-watt density elements, enclosed and protected. Interior Construction: Corrosion resistant 304 brushed stainless steel.
• Exterior Construction: Triple-wall, heavy gauge steel with scratch-resistant finish, or stainless steel (see chart); adjustable door latch and hinges.
• Insulation: Fiberglass, minimum 3'' on all sides of your laboratory test oven. Peripheral silicon door gasket to minimize heat loss.
• Vent: 1.75", adjustable. The ports on your laboratory test oven include adjustable stainless steel covers.
• Air Exchange: The intake port on your laboratory test oven allows fresh air entry to establish gravity airflow pattern.
• Shelves: Your laboratory test oven will be equipped with two (2) open wire shelves, adjustable. All models include 16 shelf positions at 0.875" increments. Stainless steel exterior models have stainless steel shelves; others are nickel plated. Stainless steel (S models only). See Chart.
• Electrical: See chart for power specifications on our laboratory test oven models; 10' power cord included.

Laboratory Test Oven Specifications
260 Degree Gravity Convection Oven, General Purpose,
Painted or Stainless Steel